PETG FRJet self-extinguishing - black (1,75 mm; 0,5 kg)
18,83 € (22,78 € with VAT 21 %)
FRJet this material is based on PETG and contains a mixture of special additives with a flame-retardant (UL94 V0 certification). It is ideal for electronic components.PETG (polyethylene terephthalate glycol)- father for large prints- high impact material than PLA, same as ABS- temperature resistant… more
FRJet this material is based on PETG and contains a mixture of special additives with a flame-retardant (UL94 V0 certification). It is ideal for electronic components.
PETG (polyethylene terephthalate glycol)
- father for large prints
- high impact material than PLA, same as ABS
- temperature resistant up to 70 °C
- no warping
- ideal for printing parts that require self-extinguishing
Nozzle: 220 - 250 °C
Heatbed: 80 - 90 °C
✅ good layer adhesion
✅ very tough, no warping
✅ high-temperature resistance up to 70 °C
✅ little shrinking
❌ high stringency material
Wipe profile instruction
Our pre-set profile is for Prusa Slic3r.
Then you open our profile wipe tower is already on the bed. You can just import your model, modify the print profile according to your own ideas and slice it.
The tower needs to be modified by your model height with function SCALE for increase height, Function CUT for decrease height.
Then you use wipe profile for FRJet its necessary to not change the size of the wipe tower in X, Y dimension or its coordinate. Our Gcode is fixed to pre-set coordination of the tower.
Wipe Gcode is saved in printer profile by line BEFORE LAYER CHANGE.
Therefore is possible to modify the filament or print profile and wipe will still work.
The print profile is set up for printers: Prusa MK3, Trilab DeltiQ L, Bart-Tech 1.2.
|Empty spool weight||0.204 kg|
|Packaging weight||0.84 kg|
|Spool dimensions||diameter: 200 mm, height: 55 mm|
|Packaging dimensions||width: 225 mm, height: 65 mm, depth: 210 mm|
|Nozzle||220 - 250 °C|
|Heatbed||80 - 90 °C|